Rule builder fields
Create a rule step by step
1
Open the rule builder
Navigate to /rules and click New rule.
2
Name the rule
Enter a descriptive name in the Rule name field.
3
Set From and To
Choose your origin mode and destination mode. Use states, a radius around a city, or Anywhere.
4
Pick equipment
Click the chips for every equipment type your fleet can haul. Leave all unselected only if you truly want alerts for every type.
5
Set rate, miles, and pickup filters
Adjust the Min rate per mile slider, enter a Max loaded miles cap, and choose a Pickup window. Decide whether to keep Include loads with no rate checked.
6
Choose alert channels
Turn on Email, SMS (if your plan supports it), and Push (if you use the mobile app). Verify your contact info is correct.
7
Create the rule
Click Create rule. The rule appears in your rules list at /rules and starts watching the board immediately. Matches show up under Notifications and in the bell at the top right.
After you create a rule
Your rule appears in the list at /rules. You can edit, pause, or delete it anytime. Alerts start within minutes of a matching load posting.The rule’s no-rate checkbox and the board’s Posted only toggle
The rule builder’s Include loads with no rate (Call for rate) checkbox controls whether your alerts fire on loads without a posted dollar rate. The load board’s Posted only toggle controls what you see on the board. They’re different controls on different surfaces and each one is set independently.Rule recipes
Copy pre-built setups for common carrier situations.
Alert channels
How email, SMS, and push notifications work and how to enable each.